ABB BRIT-90-35-1000 Bedieningshandleiding - Pagina 13

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} ABB BRIT-90-35-1000. ABB BRIT-90-35-1000 14 pagina's. Transformer bushings with rip- insulation, voltage class 35 kv

Pagina afdrukken

ABB Power Grids Ltd.

Analysis of test results

The measured and corrected tgδ

A considerable difference of the capacitance C

damage (transportation- or assembly-caused), so such bushing must not be used.

A value C

depends on the way the bushing is embedded into the transformer and is not used for diagnostic.

The value tg

is also not used for bushing diagnostic (see section 10.1).

During operation, the insulation of the bushing is aging, as evidenced by an increase in the value of tg

The limiting value of tg

An increase in the capacity C1 during operation may indicate a breakdown of one or more layers of the

bushing insulation.

Upon reaching the limit value tg

Power Grids Ltd., Russia for recommendations on the possibility of further operation of the bushing.

The service life of the bushing is at least 30 years.

12 Disposal

After reaching the end of lifetime, this product has to be disposed correctly according local laws and

regulations.

All the contained substances and material should be recycled separately. The product as a whole and its

individual parts do not contain any toxins.

Nether breathing- nor skin protection nor any special precautions are required. Apply the common and

appropriate safety standards to prevent working accidents. In case of uncertainties please contact ABB

Power Grids Ltd., Russia for advanced information and instructions.

Scope of delivery

The scope of delivery of each bushing shall include documentation and components:

1. Documentation



Test report



Operational manual



Dimensional drawing



Packing sheet

2. Components



Test adapter (1 item)



Terminate plate (as specified in the order).

value is compared with that in the routine test report.

. should not exceed 0.7%.

. or increasing the capacity C1 by more than 5%, please contact ABB

from a value of the test report (more 5%) may indicate a

GKSL 680205.021 RE

Rev. 2, 26.09.2019