DiamaPro Systems WVX-P Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DiamaPro Systems WVX-P. DiamaPro Systems WVX-P 4 pagina's. Industrial wet vac

Pagina afdrukken

DiamaPro Systems WVX-P Gebruikershandleiding

INTRODUCTION

Thank you for your recent DiamaPro® Systems purchase. You have

bought a high quality, long-life commercial vacuum cleaner. For your safety

and continued satisfaction with this product, please read this owner's

manual carefully before using. For your information, all parts used in the

manufacturing of this vacuum cleaner meet or exceed rigid quality control

standards. We stand behind all our products and are available to assist

you with a knowledgeable and dedicated staﬀ . If we can help you in any-

way, please call Customer Service at 800-622-2048.

We also recommend that you visit our website www.diamaprosystems.com

for the fastest, most eﬃ cient way to complete your product registration

and see other DiamaPro products and accessories to meet your cleaning

needs.

OPERATION

BEFORE EACH USE

(1) This vacuum cleaner is designed for wet only pickup. Please avoid

picking up dry materials.

(2) Make sure the tank is clean, and that there is no debris in the tank that

can impede the action of the pump ﬂ oat mechanism.

(3) Make sure the mesh ﬁ lter bag is installed on the inlet inside the

canister. The bag should be empty, and the slide-on clamp should be

installed on the bottom of the bag. Position the thin, ﬂ at plastic strip

that is attached to the mesh ﬁ lter bag, over the rim of the canister. This

strip helps retain the bag when it ﬁ lls with debris.

(4) Make sure that the ﬂ oat mounted on the underside of the motor head is

able to move freely, and that the ﬁ lter on the outside of the ﬂ oat hous-

ing is clean and properly in place. This ﬁ lter will protect the vacuum

motor from debris.

(5) Attach the motor head to the canister using the two metal clamps

mounted on the side of canister. The pump cord exits the rear of the

canister, near the top. Plug this cord into the electrical outlet on the top

rear of the motor head.

(6) Attach the long discharge hose to the brass ﬁ tting on the rear of the

canister. The ﬁ tting is a ball coupling type. Pull the collar of the female

brass ﬁ tting toward the canister before inserting the hose ﬁ tting.

TO OPERATE

(1) The vacuum cleaner motor is controlled by the switch on the top left

side of the motor head. The pump out feature is controlled by the

switch on the top right side of the motor head. If using the pump out

feature, the pump switch can be left on.

(2) The pump is equipped with a ﬂ oat switch, which will automatically start

the pump when the water level in the canister rises. The ﬂ oat switch

will automatically stop the pump when the liquid level drops.

(3) If the vacuum is being used without the long discharge hose, leave the

pump switch oﬀ . The liquid in the canister can also be emptied using

the short, black, corrugated hose attached to the rear of the canister.

Be sure the end of the hose is securely attached to the stationary drain

hose plug after use.

(4) Check the mesh bag frequently for debris. To empty, remove the bag

from the canister and slide oﬀ the retaining clip on the bottom of the

bag. Reinstall the mesh ﬁ lter bag before continuing to use the vacuum.

Do not operate the vacuum without the mesh ﬁ lter bag in place

NEVER LUBRICATE THE VACUUM CLEANER MO-

TOR. THE MOTOR BEARINGS ARE PERMANENTLY

SEALED. THIS VACUUM IS INTENDED FOR INDOOR

OR OUTDOOR USE AND FOR WET PICKUP, BUT IT

IS NOT INTENDED TO BE EXPOSED TO RAIN.

WARRANTY

The vacuum cleaner is warrantied for 1 year from the date of purchase.

Parts not covered under warranty are power cords, ﬁ lters, motor brushes

and squeegee blades. The warranty covers only failure due to defective

parts or workmanship and will be invalidated by improper application

and abuse.

Under no circumstances should you return a failed unit to the factory.

If you experience any problems with your vacuum during the warranty

period, contact the Customer Service Department.

SAFETY INSTRUCTIONS

When using an electrical vacuum, basic safety precautions should always

be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR

VACUUM CLEANER

WARNING: To reduce the risk of ﬁ re, electrical shock, or injury:

1. Do not leave appliance when plugged in. Unplug from outlet when not in

use and before servicing.

2. Do not expose to rain. Store indoors.

3. Do not allow to be used as a toy. Close attention is necessary when

used by or near children.

4. Use only as described in this manual. Use only manufacturer's recom-

mended attachments.

5. Do not use with damaged cord or plug. If appliance is not working as

it should, has been dropped, damaged, left outdoors, or dropped into

water, contact Customer Service.

6. Do not pull or carry by cord, use as a handle, close a door on cord, or

pull cord around sharp edges or corners. Do not run appliances over

cord. Keep cord away from heated surfaces.

7. Do not unplug by pulling on cord. To unplug, grasp the plug, not the

cord.

8. Do not handle plug or appliance with wet hands.

9. Do not put any object into openings. Do not use with any opening

blocked; keep free of dust, lint, hair and anything that may reduce air

ﬂ ow.

10. Keep hair, loose clothing, ﬁ ngers and all parts of the body away from

openings and moving parts.

11. Do not pick up anything that is burning or smoking, such as cigarettes,

matches, or hot ashes.

12. Do not use without dust bag and/or ﬁ lters in place.

13. Turn oﬀ all controls before unplugging.

14. Use extra care when cleaning on stairs.

15. Do not use to pick up ﬂ ammable or combustible liquids such as gaso-

line, or use in areas where they may be present.

16. This vacuum is for commercial use only.

17. Connect to a properly grounded outlet only. See grounding instructions

SAVE THESE INSTRUCTIONS - GROUNDING

This appliance must be grounded. If it should malfunction or breakdown,

grounding provides a path of least resistance for electric current to reduce

the risk of electric shock. This appliance is equipped with a cord having

equipment grounding conductor and grounding plug. The plug must be

inserted into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

IMPROPER CONNECTION OF THE EQUIPMENT

GROUNDING CONDUCTOR CAN RESULT IN A RISK

OF ELECTRIC SHOCK. CHECK WITH A QUALIFIED

ELECTRICIAN OR SERVICE PERSON IF YOU ARE IN

DOUBT AS TO WEATHER THE OUTLET IS PROPERLY

GROUNDED.

Do not modify the plug provided with the appliance - if it will not ﬁ t the

outlet, have a proper outlet installed by a qualiﬁ ed electrician.

This appliance is for use on a nominal 120 - Volt circuit, and has a ground-

ed plug that looks like the plug illustrated in sketch A below. A temporary

adapter that looks like the adapter illustrated in sketches B and C may be

used to connect this plug to a 2-pole receptacle as shown in sketch B if

a properly grounded receptacle is not available. The temporary adapter

should be used only until a properly grounded outlet (sketch A) can be

installed by a qualiﬁ ed electrician. The green colored ear, lug, or the like

extending from the adapter must be connected to a permanent ground

such as a properly grounded outlet box cover. Whenever the adapter is

used, it must be held in place by a metal screw.

NOTE: In Canada, the use of a temporary adapter is not permitted by the

Canadian Electrical Code.