Miller Coolmate 1.3 Gebruikershandleiding - Pagina 16
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Coolmate 1.3. Miller Coolmate 1.3 28 pagina's. Recirculating coolant system for water-cooled gtaw torches and gmaw guns
Ook voor Miller Coolmate 1.3: Gebruikershandleiding (20 pagina's)
Pagina afdrukken
4-8.
Mounting Cooler To A Small Runner Cart
allen_set
needlenose
knife
heavy-duty workclamp
stripcrimp
3/8 in.
socket wrench
hammer
airgun
vicegrip
OM-257811 Page 10
�
Complete Parts List is available at www.MillerWelds.com
tools/
flathead
philips head
steelbrush
light-duty workclamp
2
drill
handream
awl
crimper
feelergauge
1
wrench
crescent wrench
nutdriver
chippinghammer
wirecutter
Ref. 805506-B
greasegun
filterwrench
file
flashlight
ruler
Disconnect input power before
mounting cooler.
Dispose of used coolant according
to national, state, and local codes.
Do not pour down drain.
NOTICE – Do not run cooler without coolant
in tank.
1 Small Runner Cart ‒ Part No. 301318 ‒
Not Supplied
2 Screws
Use .250-20 x .50 Hex Head screws sup-
plied with cart to secure cooler to cart.
frontcutter
paintbrush