Miller CST 250 Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller CST 250. Miller CST 250 28 pagina's. Dual rack kit
Ook voor Miller CST 250: Gebruikershandleiding (28 pagina's)
Pagina afdrukken3-4. Installing Welding Power Source Onto Rack
2
OM-2238 Page 10
4
1
3
6
5
Have only qualified persons make
this installation.
Y Turn Off welding power
sources before inspecting
or installing rack.
1
Welding Power Source
2
Front Mounting Bracket Pin
Position welding power source
onto rack shelf so pins of front
mounting bracket are fully engaged
to front of welding power source.
3
Rear Mounting Bracket
Position rear mounting bracket so
its pins are fully engaged to rear
panel of welding power source.
4
Securing Bolts And Nuts
For CST 250 Models
5
Rear Mounting Holes
Install supplied bolts through Rear
Mounting Bracket and Rear Mount-
ing Holes. Install bolts and tighten.
For Maxstar 200 Models
6
Forward Mounting Holes
Mounting is the same as for the
CST 250 models, except that the
Rear Mounting Bracket will align
with the Forward Mounting Holes.
803 168-A