Miller CST 282 Gebruikershandleiding - Pagina 30

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller CST 282. Miller CST 282 42 pagina's.

Pagina afdrukken
Miller CST 282 Gebruikershandleiding
7-1.

Routine Maintenance

Disconnect power before maintaining.
�
Maintain more often during severe conditions.
SECTION 6
� = Check
Every
Every
3
3
Month-
Months
s
1/2 in.
�Unreadable Lables
(13 mm)
Every
Every
3
6
Months
Month-
s
� Damaged Weld Cables
Every
6
Month-

6-1. Blowing Out Inside of Unit

s
� Inside Unit
7-2.
Blowing Out Inside Of Unit
OM-285986 Page 24
�
Complete Parts List is available at www.MillerWelds.com
SECTION 7 – MAINTENANCE
A complete Parts List is available at www.MillerWelds.com
MAINTENANCE AND TROUBLESHOOTING
◇ = Change
Labels
� Weld Terminals
� Damaged Cords
Do not remove case
when blowing out
inside of unit (see
Section 7-2).
� = Clean
� Damaged Gas Hose
� Damaged Torch Cable
To blow out unit, direct airflow through front
and back louvers as shown.
803 942-A
� = Replace
Reference
Weld Terminals
Do not remove case when blowing
inside of unit.
OM-249336 Page 1
OM-249336 Page 1
804746-B