Miller D-74 MPa Plus Gebruikershandleiding - Pagina 18
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller D-74 MPa Plus. Miller D-74 MPa Plus 44 pagina's.
Ook voor Miller D-74 MPa Plus: Gebruikershandleiding (40 pagina's)
Pagina afdrukken
5-2. Installing Control Box And Adjusting Tilt
4
3
Tools Needed:
3/8 in.
5-3. Control Box Connections
OM-273243 Page 14
1
2
1
5
6
7
2
3
1
Weld Control
2
Bracket
3
Screw
Bracket and screws are installed
onto bottom of control at factory.
4
Swivel
Loosen screws. Place control on
swivel and slide forward. Tighten
screws.
5
Tilt Bracket
6
Rear Pivot Screw
7
Front Screw
Loosen rear pivot screw. Remove
front screw. Pivot control down-
ward to desired viewing angle. Re-
place and tighten front screw. Tight-
en pivot screw.
Ref. 252427-D
1
Interconnecting Cables
2
14 Pin Receptacle
3
Power Connector
4
19 Pin Receptacle
4
Ref. 252426-C / 252428-D