Miller Dialarc 250 AC/DC Gebruikershandleiding - Pagina 16
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Dialarc 250 AC/DC. Miller Dialarc 250 AC/DC 28 pagina's.
Ook voor Miller Dialarc 250 AC/DC: Gebruikershandleiding (36 pagina's)
Pagina afdrukken
2-7. Connecting To Weld Output Terminals
1
Route weld cables under bar.
Tools Needed:
3/4 in
OM-314 Page 12
2
3
4
For DC Weld Output
1
Negative (–) Weld Output
Terminal
2
Positive (+) Weld Output
Terminal
For Electrode Positive (DCEP),
connect work cable to Negative (–)
terminal and electrode holder cable
to Positive (+) terminal.
For Electrode Negative (DCEN),
reverse cable connections.
For AC Weld Output
3
Work Weld Output Terminal
4
Electrode Weld Output
Terminal
Connect work cable to Work
terminal and electrode cable to
Electrode terminal.
Close access door.
Y Use only one set of terminals
at a time. Range Selector
switch S2 is only high/low
range; both sets of output
terminals are energized all
the time.
ST-800 052-A / Ref. S-161 415