Miller Gold Seal GS-250 Gebruikershandleiding - Pagina 16
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Gold Seal GS-250. Miller Gold Seal GS-250 44 pagina's.
Pagina afdrukken
2-7. Installing Welding Gun
1
2-8. Installing Wire Spool And Adjusting Hub Tension
Tools Needed:
15/16 in
OM-1311 Page 12
2
4
3
When a slight force is needed to turn spool, tension is set.
1
Drive Assembly
2
Gun Securing Knob
3
Gun End
Loosen securing knob. Insert gun
end through opening until it bottoms
against drive assembly. Tighten
nut.
4
Gun Trigger Plug
Insert plug into receptacle, and
tighten threaded collar.
Close door.
Use compression spring with
8 in (200 mm) spools.
Ref. 800 921-C
072573-B