Miller Gold Seal GS-250 Gebruikershandleiding - Pagina 24
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Gold Seal GS-250. Miller Gold Seal GS-250 44 pagina's.
Pagina afdrukken
SECTION 4 – MAINTENANCE & TROUBLESHOOTING
4-1. Routine Maintenance
Damaged Or
4-2. Circuit Breaker CB1
1
OM-1311 Page 20
Y Disconnect power
Replace
Unreadable
Labels
Blow Out Or
Vacuum Inside
3
before maintaining.
3 Months
Repair Or
Replace
Cracked
Cables And
Cords
6 Months
Remove drive roll and
carrier. Apply light coat
of oil or grease to drive
motor shaft.
2
.
Maintain more often
during severe conditions.
Clean And
Tighten
Weld
Terminals
1
Circuit Breaker CB1
If CB1 opens, wire feeding stops.
2
Welding Gun
Check gun liner for blockage or
kinks.
3
Wire Drive Assembly
Check for jammed wire, binding
drive gear or misaligned drive rolls.
Allow cooling period and reset
breaker. Close door.
Ref. 800 924-C