Miller HF-251-2 Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller HF-251-2. Miller HF-251-2 38 pagina's. Miller electric high-frequency arc starter and stabilizer specifications
Ook voor Miller HF-251-2: Specificaties (2 pagina's)

Pagina afdrukken
Miller HF-251-2 Gebruikershandleiding

2-7. Connecting To Weld Output Terminals

Tools Needed:
3/4 in
1
ELECTRODE IN
CAUTION
Welding Power
Source Or
Generator
HF Unit
WORK ELECTRODE
ALWAYS connect WORK cables to
this terminal for HF protection.
2
ELECTRODE OUT
WORK
INPUT/OUTPUT
3
NOT
CONNECTING
WORK
CABLES TO HF unit will damage
welding power source or welding
generator.
Work
Work
S-168 309
Y Turn Off HF Unit and welding
power source, and discon-
nect input power before
making connections. Stop
engine on welding genera-
tors.
Y Not connecting work cables
to HF Unit will damage power
source.
Always connect
work cables to Work Input/
Output terminal.
1
Electrode In Terminal
Open left side panel. Connect elec-
trode cable from welding power
source to Electrode-In Terminal.
2
Electrode Out Terminal
Connect torch cable to Electrode-
Out Terminal.
3
Work Input/Output Terminal
Connect the work cables from the
welding power source and the work
clamp to the Work Input/Output ter-
minal. Close and secure left side
panel.
ssb2.2 11/92 – Ref. S-0752 / Ref. ST-098 956-D
OM-611 Page 13