Miller ICE-40C Gebruikershandleiding - Pagina 37
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller ICE-40C. Miller ICE-40C 40 pagina's. Air-cooled torches for plasma arc cutting
Ook voor Miller ICE-40C: Gebruikershandleiding (40 pagina's), Gebruikershandleiding (38 pagina's)
Pagina afdrukken
Drag Shield
204 323
Deflector
177 888
Shield
192 203
NOTE:
Set air pressure to
75 PSI for cutting or
55 PSI for gouging.
CONSUMABLES
To maintain the factory original performance of your equipment, use only Manufacturer's Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
For extended tip use, set Amperage control to 35.
Retaining Cup
Tip
192 050
204 325
Electrode
Retaining Cup
35A Tip
192 050
192 052
Retaining Cup
Tip
Electrode
192 050
204 332
192 047
ICE−40C
Figure 8-3. Consumable Parts For ICE-40C
Electrode
Swirl Ring
O-Ring
192 047
169 232
192 049
Standard
Cutting
Apply silicone grease
(169 231) before installing
192 048
Extended
1/8" (3 mm) stand-off
Cutting
recommended
Gouging
CAUTION
FAILURE TO RE-
PLACE WORN TIP OR
ELECTRODE WILL
RUIN TORCH AND
VOID WARRANTY.
S
Turn off power before
checking torch parts.
S
Check before each use
and hourly during op-
eration.
207 686−A
OM-2239 Page 33
207 686-A