aquanique QLFL Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} aquanique QLFL. aquanique QLFL 5 pagina's. Decorative floating lights

PREPARATION

Before beginning assembly or operation of product, make sure all parts are present. Compare parts with

package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,

install or operate the product. Contact customer service for replacement parts.

•

Estimated Assembly Time: 5 minutes

•

Tools required for assembly: Shovel.

ASSEMBLY INSTRUCTIONS

These lights can be placed in or out of the water. For installation in the water, proceed to step 1. For

installation outside of the water, proceed to step 2.

1. Place the lights in the water. Anchoring the lights using string

and a weight is recommended. Fig. 1

NOTE: String and the weight are NOT INCLUDED.

2. Dig three holes approximately 3 inches deep. Place the lights

in the holes then bury the stakes. Fig. 2

NOTE: Do not push down on the lights when installing in the

ground. The lights are made of glass and can break if not

installed correctly.

3. Make sure that the transformer and sensor are NOT

submerged. Make sure that the light sensor faces up. Fig. 3

NOTE: At night, the lights will automatically turn on.

At sunrise, they will automatically turn off.

Fig. 1

Lights

Fig. 2

(Must face up)

Sensor

Fig. 3