Miller Trailblazer 251 Gebruikershandleiding - Pagina 18
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Trailblazer 251. Miller Trailblazer 251 48 pagina's. Engine driven welding generator
Pagina afdrukken
4-3. Connecting The Battery
Tools Needed:
3/8, 1/2 in
4-4. Connecting To Weld Output Terminals
1
OM-485 Page 14
Y Connect negative (–)
cable last.
–
+
Ref. ST-800 394-C / Ref. ST-180 601-F / Ref. S-0756-D
2
3
Y Do not connect to CC and CV
terminals at the same time.
1
Work Weld Output Terminal
2
Stick/TIG (CC) Weld Output
Terminal
3
Wire (CV) Weld Output
Terminal
For MIG welding, connect work
cable to Work terminal and wire
feeder cable to Wire (CV) terminal.
For Stick/TIG welding, connect
work cable to Work terminal and
electrode holder cable to Stick/TIG
(CC) terminal.
ST-801 534 / Ref. ST-180 601-F