Miller XR-15W Gebruikershandleiding - Pagina 20

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller XR-15W. Miller XR-15W 36 pagina's. With quick disconnect ce, 200/400 ampere air/water push-pull welding gun

Pagina afdrukken
Miller XR-15W Gebruikershandleiding

6-1. Gun Controls

6-2. Shielding Gas

6-3. Sequence Of Gas Metal Arc Welding (GMAW) − Continuous Or Spot
Install &
Connect
Personal Safety
Equipment
OM-236297 Page 16
SECTION 6 − OPERATION
1
2
2
1
Put On
Set Controls
Equipment
3
Turn On Gas
Turn On Feeder
And Water (If
And Welding
Applicable)
Power Source
1
Trigger
Press trigger to energize welding
power source contactor
(if applicable), start shielding gas
flow, and begin wire feed.
2
Wire Speed Control
Use control to fine adjust wire feed
speed set on wire feeder Weld
Speed control.
The
numbers
around the control are for reference
only.
Ref. 151 666-F
1
Shielding Gas Cylinder
2
Valve
3
Gun Trigger
Open valve on cylinder just before
welding.
Gun trigger turns weld output and
gas flow on and off (see Section
6-1).
Close valve on cylinder when
finished welding.
sb5.1 6/92 − S-0621-C / Ref. 151 666-F
Begin Welding
ssb6.1* 9/92