aquantica at2i Bedieningshandleiding - Pagina 5

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} aquantica at2i. aquantica at2i 16 pagina's. For the canon t2i

29.

QUICK CONTROL BUTTON: Push to to acess the quick control screen and its functions use the cross key to navigate the screen.

30.

SET BUTTON: Press to approve selection of menu or choosen mode features.

31.

PLAYBACK BUTTON: push down to activate the monitor and review images.

32.

WB FUNCTION BUTTON: press to select the white balance selection, this button is part of the cross keys array

33.

AF MODE BUTTON: press to select the AF mode selection, this button is part of the cross keys array

34.

ERASE BUTTON: Press to delete images.

35.

PICTURE STYLE BUTTON: Press to select the desired feature. (note: It is somewhat recommended to shoot in RAW format and

concentrate on these options in post production). This button is part of the cross keys array.

36.

DRIVE MODE BUTTON: Press to select the desired drive feature. This button is part of the cross keys array.

37.

MOISTURE ALARM LED MOUNTING HOLE : A mounting hole is provided for the optional moisture alarm.

38.

REAR WINDOW LCD: This port window allows viewing of the recorder images and is used in the Live View as well as the Video mode

for framing, a cutaway in the upper right corner allows the users to see the recording pilot light. Allow viewing of menus as well.

39.

MENU BUTTON: Press to activate menu display, scroll using main or quick dial control knob and select using SET function button

40.

DISP BUTTON: pushing this button will display the shooting information on the rear display.

41.

RUBBER ANTI SKID PADS: Four rubber pads are provided to protect the housing and preventing it from sliding on wet decks.

42.

SACRIFICIAL ANODE: A zinc anodes is installed to protect your housing against salt water corrosion; it is designed to deteriorate

easier than the other strategic parts of your housing, hence the name sacriﬁcial anodes. This anodes will eventually need to be

replaced by the user as needed.

43.

MOUNTING HOLE: a 1/4" X 20 tripod hole is provided for mounting the TLC underwater tripod, strobes trays, or accessories.

CONTROLS IN DETAIL, CONTINUED

page 4