Burkert 2300 Series Snelstarthandleiding - Pagina 5
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Burkert 2300 Series. Burkert 2300 Series 19 pagina's. Remote-positioner, installation on process valves with internal air flow
Ook voor Burkert 2300 Series: Gebruiksaanwijzing (12 pagina's), Extra instructies (12 pagina's)
Pagina afdrukken
Basic Safety Instructions
4
BASIC SAFETY INSTRUCTIONS
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations; the operator is responsible for observing
these regulations, also with reference to the installation personnel.
DANGER!
Risk of injury from high pressure in the equipment or device!
▶ Before working on equipment or device, switch off the pres-
sure and deaerate or drain lines.
Risk of injury from electric shock (when electrical component
installed).
▶ Before reaching into the device, switch off the power supply
and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulati-
ons for electrical equipment!
WARNING!
Risk of injury when opening the actuator!
The actuator contains a tensioned spring. If the actuator is
opened, there is a risk of injury from the spring jumping out!
▶ The actuator must not be opened.
Risk of injury from moving parts in the device!
▶ Do not reach into openings.
Typ 2300
Danger due to loud noises.
▶ Depending on the operating conditions, the device may generate
loud noises. More detailed information on the likelihood of loud
noises is available from the relevant sales office.
▶ Wear hearing protection when in the vicinity of the device.
CAUTION!
Risk of burns!
The surface of the device may become hot during long-term
operation.
▶ Do not touch the device with bare hands.
Leaking medium when the packing gland is worn.
▶ Regularly check relief bore for leaking medium.
▶ If the media is hazardous, protect the area surrounding the dis-
charge point against dangers.
General hazardous situations.
To prevent injury, ensure:
▶ That the system cannot be activated unintentionally.
▶ Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
▶ After an interruption in the power supply or pneumatic
supply, ensure that the process is restarted in a defined or
controlled manner.
▶ The device may be operated only when in perfect condition
and in consideration of the operating instructions.
▶ Observe the safety regulations specific to the plant for applica-
tion planning and operation of the device.
english
5