Miller 20 Series Gebruikershandleiding - Pagina 16
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller 20 Series. Miller 20 Series 36 pagina's.
Pagina afdrukken
4-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the rear panel. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.
4-2. Unit Specifications
Type of Input
Welding Power
Power
Source Type
24 Volts AC Single
Constant Voltage
Phase
(CV) DC With
3.5 Amperes
14-Pin And
50/60 Hz
Contactor Control
4-3. Wire Type, Size and Feed Speed Table
Motor Speed
Wire Type
Standard
*Rated Speed Range Per IEC 60974-5
4-4. Environmental Specifications
A. IP Rating
This equipment is designed for indoor use and is not intended to be used or stored outside.
B. Temperature Specifications
Operating Temperature Range
14 to 104°F (−10 to 40°C)
C. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
OM-281138 Page 12
SECTION 4 − SPECIFICATIONS
Wire Feed
Speed Range
75 to 750 ipm
(1.9 To 19 mpm)
Max Spool Weight:
Wire Size
.023 To 5/64 in.
All
(.6 to 2 mm)
Wire
Welding
Diameter
Circuit Rating
Range
.023 To 5/64 in.
(0.6 To 2 mm)
100 Volts,
500 Amperes,
Max Spool
100%
Capacity:
Duty Cycle
18 in. (457 mm)
60 lb (27 kg)
Rated Speed Range*
IP Rating
IP21S
Storage Temperature Range
−4 to 131°F (−20 to 55°C)
Overall
Weight
Dimensions
Length: 27-7/8 in.
(708 mm)
Width: 12-3/8 in.
46 lb (20.8 kg)
(314 mm)
Height: 16 in.
(406 mm)
80 to 740 ipm
(2.0 to 18.8 mpm)
ce-emc 3 2014-07
IP21S 2014−06
Temp_2016- 07