Miller Infinity Series Gebruikershandleiding - Pagina 12
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Infinity Series. Miller Infinity Series 32 pagina's. Auto-darkening helmets
Ook voor Miller Infinity Series: Gebruikershandleiding (32 pagina's)
Pagina afdrukken
4-4.
Variable Shade Control
2
Variable Shade
Adjustment Buttons
Mode Control Button
No. 8
No. 13
No. 5
No. 8
OM-269681 Page 10
1
Grind
No. 3 only
X Mode
No. 8
No. 13
Start at the highest setting
and adjust lighter to suit the
application and your person-
al preference.
Variable Shade Adjust-
ment Procedure
Press Auto On/Off but-
ton to turn lens On.
1 Variable
2 Auto On/Off (Mode) Con-
Use the LTR and DKR adjust-
ment buttons to adjust the
lens shade in the darkened
state. Use the table in Section
1-4 to select proper shade
control setting based on your
welding process. The shade
ranges for each mode are as
follows:
Weld - No. 8–No. 13
Cut - No. 5–No. 8
Grind - No. 3 only
X-Mode - No. 8–No. 13
Start at the highest setting
and adjust lighter to suit the
application and your personal
preference.
Variable Shade Adjustment
Press Mode Control
Procedure
Button to select desired
function: Weld, Cut, or
X-Mode.
Use LTR and DKR ad-
justment buttons to se-
lect desired shade.
Begin welding or contin-
ue with other lens ad-
justments.
OM-269681 Page 1
Shade
ment Buttons
trol Button
� Press
Auto
(Mode) button to turn lens
On.
� Press
Auto
(Mode) button to select
desired function: Weld,
Cut, or X-Mode.
� Use LTR and DKR adjust-
ment buttons to select de-
sired shade.
� Begin welding or continue
with
other
adjustments.
Adjust-
On/Off
On/Off
lens