Miller Infinity Series Gebruikershandleiding - Pagina 22
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Infinity Series. Miller Infinity Series 32 pagina's. Auto-darkening helmets
Ook voor Miller Infinity Series: Gebruikershandleiding (32 pagina's)
Pagina afdrukken
SECTION 5 – ADJUSTING HEADGEAR
5-1.
Adjusting Headgear
�
There are four headgear adjustments:
headgear top, tightness, angle, and
distance.
1 Headgear Top
Adjusts headgear for proper depth on the
head to ensure correct balance and stability.
2 Headgear Tightness
To adjust, turn the adjusting knob located on
the back of the headgear left or right to de-
sired tightness.
3 Angle Adjustment (Not Shown)
OM-269681 Page 20
1
2
4
Seven slots on the right side of the head-
band provide adjustment for the forward tilt
of the helmet. To adjust, lift and reposition
the control arm to the desired position.
4 Distance Adjustment
Adjusts the distance between the face and
the lens. To adjust, press black tabs on the
top and bottom of the pivot point and use
other hand to slide headgear forward or
backward. Release tabs. (Both sides must
be equally positioned for proper vision.)
�
Numbers on the adjustment slides indi-
cate set position so both sides can be
adjusted equally.
There are four hea
adjustments: head
top, tightness, a
and distance.
1
Headgear Top
Adjusts headgear for p
depth on the head to e
correct balance and sta
2
Headgear Tightnes
To adjust, turn the adju
knob located on the ba
the headgear left or rig
desired tightness.
3
Angle Adjustment
Shown)
Seven slots on the righ
of the headband provid
justment for the forward
the helmet. To adjust, li
reposition the control a
the desired position.
4
Distance Adjustme
Adjusts the distance
tween the face and the
To adjust, press black
on the top and bottom
pivot point and use
hand to slide headgea
ward or backward. Re
tabs. (Both sides mu
equally positioned for p
vision.)
Numbers on the a
ment slides indica
position so both
can be adjusted eq