Miller MIGmatic M-25 Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller MIGmatic M-25. Miller MIGmatic M-25 20 pagina's. Air-cooled guns for gmaw and fcaw welding
Ook voor Miller MIGmatic M-25: Gebruikershandleiding (8 pagina's), Gebruikershandleiding (12 pagina's)
Pagina afdrukken
3-3. Installing Gun
1
4-1. Operating The Gun
OM-227 796 Page 6
4
3
2
SECTION 4 − OPERATION
1
1
Gun Securing Knob
2
Gun End
Loosen knob. Insert gun end until it
bottoms against drive assembly.
Tighten knob.
3
Gun Trigger Plug
Insert into receptacle, and tighten
threaded collar.
4
Friction Terminals
Some applications will require
cutting off trigger plug and installing
0.250 female friction terminals onto
end of leads.
See wire feeder manual for
threading procedure.
804 465-A
1
Trigger Switch
When pressed, energized wire
feeds and shielding gas flows.
Ref. 800 797-C