Miller PipeWorx 350 Gebruikershandleiding - Pagina 16

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller PipeWorx 350. Miller PipeWorx 350 32 pagina's.

5-3. Installing Welding Power Source Onto Rack

Rear Of Power Source And Rack

Hole Layout For 4-Pack Rack

Hole Layout For 6-Pack Rack

OM-259463 Page 12

Front Of Power Source And Rack

Tools Needed:

1/2 in.

Have only qualified persons make

this installation.

Turn

Off

welding

power

sources before inspecting or

installing rack.

Rear Rack Mounting Bracket

Loosely attach one rack mounting

bracket (with the weld nuts facing

up) on the back of the rack with 2

screws.

Welding Power Source

Slide power source onto rack in front

of the bracket.

Align the channels of the rear base

brackets with the rack mounting

bracket. Push the power source

back so the mounting bracket slides

into the channels.

Front Rack Mounting Bracket

Slide the second rack mounting

bracket (with the weld nuts facing

up) into the channels on the front

base brackets. Attach bracket to

rack using 2 screws. Tighten all 4

bracket screws to 10 ft lb (13.6 N⋅m).

259 422-A / 254 712-A