Miller Spoolmatic 30A Gebruikershandleiding - Pagina 12
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Spoolmatic 30A. Miller Spoolmatic 30A 32 pagina's. Welding guns
Ook voor Miller Spoolmatic 30A: Gebruikershandleiding (32 pagina's), Gebruikershandleiding (36 pagina's)
Pagina afdrukken
5-4. Connecting To 24 Volt Weld Control
Tools Needed:
1-1/8, 5/8 in.
5-5. Connecting To 115 Volt Weld Control
6
Tools Needed:
1-1/8, 5/8 in.
OM-1213 Page 8
1
5
3
Left Side
Wrapper Off
2
3
4
3
2
1
4
1
Gas Hose
Connect fitting to regulator/flowme-
ter (see Section 5-6).
2
24 Volt Weld Control
3
Trigger Control Cord
Insert plug into receptacle, and
tighten threaded collar.
4
Weld Cable
Connect to positive (+) weld output
terminal on welding power source
according to its Owner's Manual.
150 917-G
1
115 Volt Weld Control
2
Gas Hose
Connect to regulator/flowmeter.
3
Trigger Control Cord
Insert plug into receptacle, and
tighten threaded collar.
4
Weld Cable
5
Positive (+) Weld Output
Terminal In Control
Connect weld cable to positive (+)
weld output terminal in weld control.
Reinstall weld control wrapper.
Ref. 149 549-A / 149 966-J