Miller SUITCASE 12RC Gebruikershandleiding - Pagina 19
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller SUITCASE 12RC. Miller SUITCASE 12RC 40 pagina's. Wire feeder with gun and meters
Ook voor Miller SUITCASE 12RC: Specificaties (2 pagina's), Gebruikershandleiding (36 pagina's), Gebruikershandleiding (40 pagina's)
Pagina afdrukken
5-4. Connecting Shielding Gas
3
5-5. Connecting Weld Cable
1
3
4
2
5
1
2
NOTICE − This feeder has a shield-
ing gas filter that requires special
attention when cleaning. See Sec-
tion 7-3 for proper cleaning instruc-
tions.
1
Gas Hose With 5/8-18
Right-hand Thread Fittings
(Customer Supplied)
Rear View
.
Tighten gas hose fitting to a
maximum of 100 in. lb (12 NVm).
2
Shielding Gas Cylinder
.
Shielding gas pressure not to
exceed 100 psi (689 kPa).
3
Valve
4
Flowmeter
5
14-Pin Plug
Close valve on cylinder when fin-
ished welding.
!
Turn Off wire feeder and
welding power source. Stop
engine on welding
generator.
1
User-Supplied Weld Cable
Follow wire manufacturer's recom-
mendations for weld cable polarity.
2
Male Connector
3
User-Supplied Female
Connector
Connect
connectors.
263 836-A
male
and
female
263 837-A
OM-263984 Page 15