Miller T94i XL Series Gebruikershandleiding - Pagina 18
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller T94i XL Series. Miller T94i XL Series 40 pagina's. Auto-darkening helmets
Pagina afdrukken
5-6.
Lens Delay Control
1
1 Mode Button
2 Adjust Button
3 Increase (+) And Decrease (–) Buttons
Select Delay by pressing the Adjust button.
Use the + / - buttons to adjust the time for
the lens to switch to the clear state after
welding or cutting.
The delay is particularly useful in eliminating
bright after-rays present in higher amperage
applications where the molten puddle re-
mains bright momentarily after welding. Use
the + / - buttons to adjust delay from 0 to 10
(0.1 to 1.0 second).
The delay ranges for each mode are as
follows:
OM-255503 Page 16
(R)
MEMO ( B )
1
2
2
Weld, Cut, X-Modes - 0 - 10
Grind Mode - No delay adjustment
�
There is no lens delay adjustment in
the Grind mode.
Lens Delay Adjustment Procedure
� Press Mode (On/Off) button to turn lens
On. Helmet control display will appear.
� Press Mode button to select desired
function: Weld, Cut, or X-Mode.
� Use Adjust button to select delay, and
then adjust to desired delay using + / -
buttons.
� Begin welding or continue with other
lens adjustments.
3