Miller skyline 90 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller skyline 90. Miller skyline 90 13 pagina's. Fluid head

Operating Instructions

The operating instructions are described in three steps. Please

read and understand these instructions before using this

equipment. Do not omit any steps.

The Skyline 90 Fluid Head can be mounted on a MITCHELL

BASE only.

1 Fluid Head Set-up (Mitchell Base)

1.1 Ensure the Tripod, Jib, Pedestal etc. is level before

placing head on Mitchell Base.

1.2 Place Fluid Head on a Mitchell Base, ensure that the

keyway insert on head has engaged in the keyway slot on

Mitcheel Base.

1.3 Tighten the Mitchell Castle Nut to Mitchell Centre Screw.

1.4 Add the Pan Handles to serrated boss, position to your

desired angle and length.

1.5 Set the initial control settings as follows – see Figure 1 & 2:

 Select Counterbalance to position 100% (top setting).

 Select Pan & Tilt drag to position 0.

 Engage the Tilt Safety Lock.

Fig. 4