DIAMO ONE Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DIAMO ONE. DIAMO ONE 20 pagina's.

Turning Off

To power off your Diamo One, press the Power

button, then release. The Power button should go dark.

You can adjust the amount of water provided by each of

the Diamo One's buttons if your cups are larger or smaller

than the default setting. See the table below for default,

minimum, and maximum amounts. Continue reading to

learn how to change those settings.

Single (Espresso)

Double (Lungo)

Americano

Note: The Americano setting is determined by how you set

the Single (Espresso) amounts. The formula is

(1.6 x Espresso Settings) + (1.6 x Espresso Settings).

Lastly, when changing settings, we strongly

recommend that you do not do so with a coffee pod in

place. Just run straight water so there is no waste.

Changing the amount for Single (Espresso):

Power on the Diamo One and wait for it to pre-heat

as normal.

When pre-heating is finished

(Power LED is green), press and

HOLD the Single (Espresso) button.

Default Amount

1.5 oz. (45 mL)

3.7 oz. (110 mL)

4.9 oz. (144 mL)

Minimum Amount

1 oz. (30 mL)

2 oz. (60 mL)

3.2 oz. (96 mL)

Maximum Amount

2 oz. (60 mL)

10.1 oz. (300 mL)

6.5 oz. (192 mL)