Miller Subarc DC 1250 Gebruikershandleiding - Pagina 28
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Subarc DC 1250. Miller Subarc DC 1250 40 pagina's. Arc welding power source
Pagina afdrukken
SECTION 6 − MAINTENANCE & TROUBLESHOOTING
6-1. Routine Maintenance
3 Months
Replace
unreadable
labels.
6 Months
Blow out or vacuum inside.
During heavy service, clean monthly.
6-2. Fuse F1
Tools Needed:
3/8 in
OM-2223 Page 24
Repair or
replace
cracked weld
cable.
OR
1
Y Disconnect power before maintaining.
Clean and
tighten weld
terminals.
Y Turn Off power before open-
ing rear access door.
1
Fuse F1 (See Parts List For
Rating)
Fuse F1 protects control transform-
er from overload. If F1 opens, weld
output and fan motor stops. Re-
place F1.
Ref. 802 295