Miller TM-4414K Technisch handboek - Pagina 11

Blader online of download pdf Technisch handboek voor {categorie_naam} Miller TM-4414K. Miller TM-4414K 36 pagina's.

Pagina afdrukken

4-1. Maintenance Schedule

1/2 in.
(13 mm)

4-2. Overload Protection

Belt/Hydraulic Drive Generator
SECTION 4 − MAINTENANCE
Every 250 h
Check Belt
Tension
(Belt-Driven
Models Only)
Every 500 h
Service Welding Generator
Brushes And Slip Rings. Service
More Often In Dirty Conditions.*
!
Stop engine before maintaining.
.
Service more often if used in severe conditions.
*
To be done by Factory Authorized Service Agent.
Replace
Unreadable
Blow Out Inside Of
During Heavy Service,
Clean Monthly.
!
Stop engine.
.
When a circuit breaker opens,
it usually indicates a more seri-
ous problem exists. Contact
Factory Authorized Service
Agent.
Open cover to access generator.
1
Circuit Breaker CB1
CB1 protects the generator wind-
ings from overload. If CB1 opens,
generator output stops.
Close covers before operating unit.
1
Labels.
Generator.
803 233
TM-4414 Page 7