Miller ICE-27T Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller ICE-27T. Miller ICE-27T 36 pagina's. Air-cooled torches for plasma arc cutting
Ook voor Miller ICE-27T: Gebruikershandleiding (36 pagina's), Gebruikershandleiding (38 pagina's)

Pagina afdrukken
Miller ICE-27T Gebruikershandleiding

4-6. Connecting Gas/Air Supply

Tools Needed:
9/16 in

4-7. Connecting Work Clamp

2
1
3
1
.
Use only clean, dry air with 90
to 110 psi (620 to 758 kPa)
pressure.
1
Gas/Air Inlet Opening
2
Hose
3
Teflon Tape
Obtain hose with 1/4 NPT right-
hand thread fitting. Wrap threads
with teflon tape (optional) or apply
pipe sealant, and install fitting in
opening. Route hose to gas/air
supply.
2
From Gas/Air
Supply
1
Work Clamp
2
Workpiece
Connect work clamp to a clean,
paint-free location on workpiece, as
close to cutting area as possible.
804 505-A
802 463-A
OM-225 216 Page 11