Miller WP-18 Series Gebruikershandleiding - Pagina 15
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller WP-18 Series. Miller WP-18 Series 28 pagina's.
Ook voor Miller WP-18 Series: Gebruikershandleiding (20 pagina's)
Pagina afdrukken
C. Connecting Torch To A SyncrowaveR 250 DX Or 350 LX TIGRunner Unit
6
10
11
9
8
7
!
Turn Off welding power source
power before installing torch.
1
Gas Hose With 5/8-18 Right-Hand
Fittings (Customer Supplied)
Connections:
2
Gas Cylinder
3
Regulator/Flowmeter
4
Power Source
5
Coolant System
6
Torch
7
Coolant-Into Torch Hose (Blue)
4
8
Coolant-Out Of Torch/Power
Cable (Red)
3
Connect torch coolant-out of torch/pow-
er cable to power cable adapter, and
connect adapter to weld output terminal.
2
9
Torch Gas Hose
10 Work Clamp
Connect work clamp to a clean, paint-
free location on workpiece, close to the
weld.
Use wire brush or sandpaper to clean
weld joint area.
11 Foot Control
1
5
Tools Needed:
11/16 in.
804 994-C
OM-225 429 Page 11