Miller WP-18SC Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller WP-18SC. Miller WP-18SC 24 pagina's.
Ook voor Miller WP-18SC: Gebruikershandleiding (20 pagina's)

Pagina afdrukken
Miller WP-18SC Gebruikershandleiding
B. Connecting Torch To A Dynastyt 350 TIGRunnert
12
5
6
7
10
9 9
8
OM-225 271 Page 10
1
11
!
Turn Off welding power source
power before installing torch..
2
1
Gas Hose With 5/8-18 Right-Hand
Fittings (Customer Supplied)
Connections:
2
Regulator/Flowmeter
3
Gas Cylinder
4
Coolant System
3
5
Electrode Weld Output Terminal
Connect TIG torch to electrode weld
output terminal.
6
Gas Out Connection
Connect TIG torch gas hose to gas out
fitting.
7
Work Weld Output Terminal
8
Work Lead (Clamp)
Connect work lead to work weld output
terminal.
9
Coolant-Into Torch Hose (Blue)
Connect torch coolant-in (blue) hose to
coolant system coolant-out connection.
10 Coolant-Out Of Torch Power
Cable (Red)
Connect torch coolant-out (red) hose to
coolant system coolant-in connection.
11 Welding Power Source
12 Foot Control
4
Tools Needed:
11/16 in.
802 561-B