burkle 5600-0802 Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} burkle 5600-0802. burkle 5600-0802 12 pagina's. Pp barrel pump - discharge hose/stopcock
CAUTION!
Fluid ejection off the filling container. Bodily injury
due to escaping liquid.
`
`
Wear the necessary protective clothing.
Completing filling and dismounting
1. After the last pump stroke, leave the piston rod in
the lower position and insert it into the pump up to
the stop.
2. Close the shut-off valve on the discharge hose.
3. To prevent any liquid continue to run (siphoning
principle), fix the discharge hose above the liquid
level in the original container.
Accessories
Type
PP barrel screw joint
PP barrel screw joint
PP barrel screw joint
Container screw joint
PVC barrel plug
Discharge hose with stopcock
SafetyBox
Drain safety stand
More accessories can be found at www.buerkle.de
Troubleshooting
Problem
Liquid is not pumped.
Specification
R 2", steel fine outer thread
Mauser 2", coarse outer thread
TriSure, coarse outer thread
Opening Ø 60 mm
Ø 40 - 70 mm
1,20 m
Incl. safety goggles and protective gloves
Total length 117 cm, Ø 35 mm
To eliminate the error
Bottom valve is polluted. Clean the pump.
If there is only little residual liquid in the container, the pumping must be carried
out for a longer time.
WARNING!
Some liquid will continue to run after the
discharge hose is unscrewed. Bodily injury due to
escaping liquid.
`
`
Close the shut-off valve on the discharge hose.
`
`
Raise the discharge hose and allow the liquid to
run back into the container.
4. Unscrew the discharge hose.
5. Carefully unscrew the instrument from the container.
6. Rinse the instrument with a pH-neutral fluid.
English
Number
Item No.
1
5600-3130
1
5600-3170
1
5600-3180
1
5600-3140
1
5600-3150
1
5600-0100
1
2507-9000
1
5618-1000