Aquapeutics Mazatlan Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Aquapeutics Mazatlan. Aquapeutics Mazatlan 15 pagina's.

Please note: If you have purchased a Tub with the additional heater option it is very important to

understand that the electrical requirements for your unit have changed. The heater requires a second

separate electrical circuit that can supply 13 amps at 110 volts in addition to what your tub had originally

needed.

Pick a side wall water jet pipe that is convenient to work on. Measure the distance taken up by the water

heater. (Approximately 7 and 5/8 inches). Cut this part out. Glue the ends of the water heater and wait

until the glue sets as per the manufactures instructions. Plug the heater in. It has its own thermostatically

controlled on/off and temperature controls. It will turn on when there is water present and the temperature

is below 102degrees and will shut off at 104 degrees.

separate GFI 110 volt circuit.

Optional

water

heater

110 and 220 volt

Electrical

Remember that this heater is plugged into a