AQUAPHOR RO-102S Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AQUAPHOR RO-102S. AQUAPHOR RO-102S 20 pagina's. Reverse osmosis system
Ook voor AQUAPHOR RO-102S: Gebruikershandleiding (16 pagina's)

Pagina afdrukken
AQUAPHOR RO-102S Gebruikershandleiding

8. Slotted plug installation

Install the slotted plug into the JG tube 3/8" (9.5 mm) tube to a stop, as shown on figure 10.
1.
Remove the clip from the JG tube 3/8" socket of the water filter, and then connect this tube end to it
2.
(see the connection of the JG tubes on figures 6 and 7).
Attention! The set includes three slotted plugs: one for installation and two are for spares.

9. Starting RO

To start RO, you must connect the supply tube and carry out the flushing procedure of filter and membrane
cartridges.
Step 1. Connect the incoming tubes according to the diagram
below (figure 11). The tube connection scheme is illustrated
on figure 6
AQUAPHOR RO-101S, RO-102S
Slotted plug
Figure 10. Slotted plug installation
Figure 11. Incoming tubes connection
13