BURL B16-BMB5 MOTHERSHIP Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} BURL B16-BMB5 MOTHERSHIP. BURL B16-BMB5 MOTHERSHIP 11 pagina's.

Pagina afdrukken
IN THE BOX:
• B16-BMB5 Mothership Chassis
• IEC power cable with 4 Rack Screws
• 1 Rack Vent

1. GETTING STARTED

1.1 Register
Please register all serial numbers for your B16 MOTHERSHIP chassis and all Daughter Cards.
You must register to activate your warranty! Please visit: www.burlaudio.com/register.
1.2 Install Daughter Cards (if necessary)
If the Daughter Cards have been pre-installed, skip to page 2, step 1.7.
1.3 Remove lid
1.
Remove 9 screws on top and 2 on each side (Image 1).
2.
Push lid up from card slot (Image 2).
Image 1: Top view shows location of 4
screws on side before removing the lid.
1.4 Daughter Card Installation:
1.
Make sure each card is inserted into the card guides, and the card is properly connected
to the backplane.
2.
Pull cables through to the front for connection to faceplate.
3.
Inputs 1-8 or outputs 9-16 are found in slot 1. Inputs 9-16 or outputs 1-8 are found in
slot 2 (Image 3).
Image 3: Front view with card slot numbers. Configuration for 8 in, 8 out.
SECTION 1
• USB Type A to Type B Cable
• QuickStart Guide
• BMB5 Motherboard pre-installed
Image 2: Push lid up.
1