Burl Audio B2 Bomber DAC Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Burl Audio B2 Bomber DAC. Burl Audio B2 Bomber DAC 17 pagina's. With dante

Pagina afdrukken

Getting Started:

1.
Connect XLR cables to analog input.
2.
Connect desired digital output (Dante, AES, SPDIF or Optical).
3.
Connect Word Clock cables if clocking via Word Clock (clocking via Dante, SPDIF or AES is also possible).
4.
Set clock to Int. or Ext. (Internal recommended whenever possible).
5.
Set sample rate on front panel, when clock master.
Select Dual Wire On or Off.
6.
Set input level. We recommend starting at -18 dbfs.
7.
B2 Bomber ADC Signal Path
INPUT
PIN 2
PIN 3
PIN 1
Getting Started:
1.
Connect XLR cables to (analog) output.
2.
Connect desired digital Input Source (Dante, AES, SPDIF or Optical).
3.
Connect Word Clock cables if clocking via Word Clock
(clocking via Dante, SPDIF or AES is also possible).
Select Input Source.
Set clock to Int., Ext. or Digital In (Internal clock recommended whenever possible).
4.
5.
Set sample rate on front panel, when clock master.
6.
Set Output Level.
B2 Bomber DAC Signal Path
Figure 2
B2 BOMBER ADC
BX1 Input
Transformer
Input Level
B2 BOMBER DAC
Attenuator
DAC
ADC
BOPA1
OUTPUT
+ PIN 2
- PIN 3
PIN 1
BOPA1
6
Figure 1