Aquaport DELUXE AQP-WCM Handmatig - Pagina 9
Blader online of download pdf Handmatig voor {categorie_naam} Aquaport DELUXE AQP-WCM. Aquaport DELUXE AQP-WCM 12 pagina's. Executive water cooler, cold and room
Pagina afdrukkenF. Trouble Shooting
BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST.
Problem
Possible Causes
1. Unit is not plugged into the wall socket.
No Power
2. Power switch at rear of unit is turned off.
3. Fuse has blown.
1. Unit is not plugged into the wall socket.
2. Power switch at rear of unit is turned off.
Not Cooling
3. Unit may have been laid down during
transport.
Water is
leaking. *99%
of leaks that
1. Pin hole in spring water bottle.
may occur with
2. Faulty float valve on filter bottle.
this unit are
3. Tap is not installed correctly.
caused by the
4. Loose hose connection.
bottle used
with the water
cooler*
What To Do
1. Check connection to wall socket.
2. Turn unit on from rear power switch.
3. Replace with new fuse.
1. Check connection to wall socket.
2. Turn unit on from rear power switch.
3. If the unit has been laid down during transport, keep the unit
up right for 48 hours before turning on. If still not cooling call
customer service on 1300 764 325.
1. Pin hole leaks are common when using polycarbonate spring
water bottles. The bottle supporter of the Executive Water Cooler
is fitted with a non-spill valve which will stop the water cooler
leaking if a spring water bottle has a pin hole. However it is highly
recommended that the spring water bottle is replaced and the fault
reported to the spring water supplier.
2. Float valve on filter bottle is not shutting off, contact filter bottle
supplier for replacement float valve.
3. Ensure the tap in screwed onto the water cooler tightly.
4. Call customer service on 1300 764 325.
INSTALLATION AND OPERATING INSTRUCTIONS 7