AquaPower AP23RP Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AquaPower AP23RP. AquaPower AP23RP 16 pagina's. Aquapower salt water chlorinator
Pagina afdrukkenPLEASE NOTE
1.
Always test the salt level of the pool before calculating your salt
requirements. This is very important because a pool that has been treated
with other forms of chlorine may already have a significant salt level in it.
This is due to the fact that chlorine (Sodium Chloride) breaks down into
salt and water. If a salt test is not performed, you may actually be adding
too much salt which will cause the chlorinator not to perform as intended.
If the pool or spa is new then you will not need to test for chlorine, since
fresh water contains no salt.
2.
When setting the On and Off times, be aware that the time clock and
On/Off settings must be in 24 hour format, (i.e. 6:00pm = 18:00 hrs.). The
chlorinator will not accept an operating time period which travels from PM
to AM (through midnight).
If you would like the unit to operate on automatic through midnight, you
must use two time periods.
For Example: To turn on at 9pm and turn off at 9am
On 1 set to 21:00
Off 1 set to 23:50
On 2 set to 00:00
Off 2 set to 09:00
The first time period must switch off before midnight with the second
time period beginning at midnight or later.
AQUAPOWER-PLUS WARRANTY
Please complete on day of installation and return to PET Pool Products, Inc.
Date of purchase
Date of Installation
Name
Address
City
Telephone
Supplied by
Telephone
Fax
E-mail
Model:
AP12RP
AP15AG
AP18RP
AP23RP
AP30RP
AP40RP
AP60RP
Residential application
Commercial application
Who Installed
State
Zip
29