Burley 200 Series Gebruiksaanwijzing

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Burley 200 Series. Burley 200 Series 2 pagina's.

Pagina afdrukken

Trouble shooting guide.

The following instructions should answer any questions or problems which you may

have. Although your guarantee is with the retailer from whom you purchased the

appliance, should this guide not provide the information you require, please call our

help-line direct for further guidance on your next course of action.

If you suspect that the appliance is not operating correctly:

1. Ensure that the fire is plugged into a wall socket.

2. Turn both switches on (by pushing the lower part of the switch) and ensure that the

thermostat wheel is set on 10 (Fully clockwise)

Symptom.

a) No heat or light.

•

Check that the wall socket is not faulty by using another appliance in it. Check fuse

b) Heat comes on but no light. The lamps will need replacing, see (replacing Lamp)

above.

First check that the new lamp works by testing it in a table lamp.

c) Light comes on but no heat. Are both switches on? If the fan blows warm for a

short time then blows cold it implies that the air intake and the blades of the fan need

cleaning, see (Cleaning) above.

OPERATING INSTRUCTIONS

d) Plug gets hot. It is nearly always the wall socket which is at fault. Check the fire in

another socket; it will not get as warm. Stop using the faulty socket immediately and

call an electrician. Many house fires are caused by faulty sockets overheating.

e) Lamps do not last very long. If the lamps do not last very long there is nothing

FOR MODELS IN THE

wrong with the fire. It is not possible to predict the life of a lamp, some burn out more

quickly than others.

f) Noise from the fan. Unfortunately there is always some noise from the fan. We do

our utmost to reduce this, but they will never be silent.

g) 'Flame does not flicker'. Remove the fiberglass fuel bed see (replacing lamp).

200

Check that the spinners are not catching on anything. Remove the spinner and run a

blunt pencil around the inside of the plastic center cap (this deposits a little graphite

which acts a lubricant.) Sharpen the point of the pin with a piece of emery. If

necessary, re-shape the spinner by placing it upside down in a mug and gently

pushing the center downwards. Re-assemble before using the appliance.

Guarantee.

RANGE

Any fault (other than that caused by abnormal treatment, or damage caused by leaving

the ashpan cover in front of the fire whilst the heater is on) which occurs within 12

months of the date of purchase, will be corrected free of charge. This does not apply to

lamp failures whose life, regretfully, we cannot predict. In the event of complaint, please

phone us for guidance. Should a repair be necessary the appliance will need returning

to the place of purchase.

Burley Appliances Ltd., Lands' End Way, Oakham, Rutland. U.K. LE15

6RB. Telephone +44 (0)1572 756956. Fax +44 (0)1572 724390. E-

Unless specifically stated in these instructions, alterations to this product are not per-

mail [email protected] Website www.burley.co.uk

mitted. Any alterations made, that are not specifically stated could potentially be un-

safe and will invalidate your guarantee. (This includes removal of the fitted plug).

Issue 2.2018 INS0200-18