CHROMOFLEX Pro Series Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} CHROMOFLEX Pro Series. CHROMOFLEX Pro Series 10 pagina's. 1/2 channel
Ook voor CHROMOFLEX Pro Series: Gebruiksaanwijzing (6 pagina's)
Pagina afdrukkenPlease read this manual carefully and keep it in a safe place!
1. Introduction
®
CHROMOFLEX
Pro
consists of up to 4-channels (for modern R-G-B-W LED stripes - Item-no. 66000459) and receives all control
signals via Bluetooth. Therefore Android devices with Bluetooth are required for controlling.
Several
CHROMOFLEX
intuitive app, but only individually. Operating range depends on the environment. Operation of up to 50 metres
should be possible outdoors. Indoors an operating range of 10 metres should be unproblematic.
2. Usage
The modules were designed for indoor use in dry places. The LEDs might also be used in wet environments or
outdoors, if suited for that purpose. For outdoor use we also offer optional housings.
Important: The modules must be operated with a power supply that is matched to the used LEDs! Non-LED loads
(especially inductive loads like motors, coils, etc.) might damage or destroy the module.
If any of the before mentioned points is not observed short circuit or electric shock might occur.
®
CHROMOFLEX
Pro
3. Technical data
Operating voltage: 8V DC to 26V DC
Protection class: III
Output current 4 channels: max. 3A / channel
Output current 3 channels: max. 4A / channel
Output current 2 channels: max. 4A / channel
Output current 1 channels: max. 6A / channel
Dimensions (L/W/H): 180 / 52 / 22mm
Current consumption of one unit (without LED): about 10-45mA
Ambient temperature: 0°C ~ +50°C (in dry conditions only with sufficient air circulation for heat dissipation,
non-condensing)
Radio frequency: 2.4 GHz
Manufacturer: Josef Barthelme GmbH & Co. KG
4. Safety instructions
The modules might produce some heat. Care must be taken to provide unrestricted air ventilation.
The unit is equipped with a limited protection against reverse polarity. Connecting the power in reverse polarity
can destroy the module, even if connected for a short time only.
Important: It is guaranteed by design that the units will never generate any higher voltage than the supply voltage.
The module is the ideal solution for use in low-voltage areas, like pools, steam baths, SPAs, etc.
Electronics must not be modified. Observe the official regulations for electrical devices (like DIN, VDE, EN),
especially when LEDs are used in wet areas!
This product is not a toy, keep away from children!
We decline any liability, loss or damage caused by improperly used modules! Guarantee is also lost in such cases.
LEDs can get quite hot. We strongly recommend ensuring maximum operating temperature is not exceeded,
because this might reduce the expected life time of the LEDs significantly.
WARNING #1: LED light may have very high intensity even when dimmed. Some modern LEDs are classified by
the lasers marking obligation. Particularly in connection with optics also weak LEDs may be very dangerous.
Staring into LEDs may cause irreparable damage to the eye's retina. Hence: NEVER STARE INTO THE BEAM.
Use diffusers to spread the intensity!
WARNING #2: Please be aware of the fact that LED light may cause side effects. This light changes intensity very
fast! Changing light may affect the perception and is also known to trigger epileptic seizures in persons who are
photosensitive.
5. Installation
The electric wiring/connection must comply with all current and valid national requirements, be constructed by a
certified electrical tradesman, and, comply with all the requirements set forth in this planning manual. Connection
scheme see chapter 6.1.
Attention: Disconnect the system and the device before doing any work!
Assembly site
V 1.1 / 19.03.2014
Bluetooth is an advancement of
®
Bluetooth devices can be controlled successively with an Android device via the
Pro
Bluetooth series is using Bluetooth technology.
®
CHROMOFLEX
Pro
7 / 10
Series. The Bluetooth version
®
CHROMOFLEX
Pro
Bluetooth