ChromTech Porvair Miniseal II Handmatig - Pagina 10

Blader online of download pdf Handmatig voor {categorie_naam} ChromTech Porvair Miniseal II. ChromTech Porvair Miniseal II 20 pagina's.

Plate Spacers
The MiniSeal 2 utilises plate spacers to make the sealing process even quicker.
There are three plate spacers provided,
- 1 x Top plate spacer (10mm)
- 1 x 25mm spacer
- 1 x 15mm spacer
The Plate Spacers can be used in different combinations to give heights between 10mm to
51mm which allows for plates with heights between 8mm to 54mm to be sealed (see the table
below for more information on plate combinations).
Spacer/s
Top plate spacer (10mm)
Top plate spacer + 16mm spacer
Top plate spacer + 25mm spacer
Top plate spacer + 16mm spacer + 25mm spacer
How To Use The Plate Spacers
1. Select the spacers required and place them on the shuttle slide plate using the locating dowels
on each spacer.
2. Place the Shuttle Top Plate on the top of the Plate Spacers.
3. The Plate Spacers are now set up and the machine is ready to be used.
Notes On Using The Plate Spacers
* The Shuttle Top Plate MUST always be used
* The heater block has a maximum travel of 30mm, therefore the combined height of the Plate
Spacers and the microplate must be at least 30mm.
Plate Height Range (Max to
MiniSeal 2 Issue 1
Min)
54mm to 34mm
38mm to 17mm
29mm to 9mm
12mm to 8mm