BURLI MAMMOTH RACK Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} BURLI MAMMOTH RACK. BURLI MAMMOTH RACK 7 pagina's.

MAMMOTH RACK

Step 2 – Attach Pull-up Bars

Tools Required: Stepladder, Adjustable Wrench, 15/16

Materials Included: Fat/Skinny Combo Pull-up Bar (1), Single 1.25" Pull-up Bar (1), Hex Bolt (8),

Nyloc Nut (8), Washer (16)

Materials Needed: None

Stand both sides upright spaced approximately 4' apart using the help of a

second person.

1.1. Note: Confirm the hole pattern on the foot pads of the Upright Posts

match the diagram above.

2. Place the Fat/Skinny Pull-up Bar between both sides

3. Insert Hex Bolt (4) with Washer (4) through Upright Post and Fat/Skinny Pull-

up Bar with the threaded end of the Hex Bolt facing inward as shown in the

diagram below.

4. Fasten Washer (4) and Nyloc Nut (4) to threaded end of Hex Bolt using 15/16"

Socket Wrench and Adjustable Wrench.

5. Repeat Step 2 – Step 3 with Single 1.25" Pull-up Bar

Socket Wrench