Diamond PIZZA/D38 Gebruiksaanwijzing en onderhoudshandleiding - Pagina 9

Blader online of download pdf Gebruiksaanwijzing en onderhoudshandleiding voor {categorie_naam} Diamond PIZZA/D38. Diamond PIZZA/D38 13 pagina's.

If the machine is installed in countries where particular regulations are in

effect, dispose of the packing materials as prescribed by those

regulations.

CHAP.4 - INSTALLATION

4.1 - PLACEMENT OF THE MACHINE

The surface on which the machine stands should have a sufficient area to

contain the dimensions of the machine indicated in the Table on page 07,

and should be level, dry, smooth, sturdy, stable and at a height of 80 cm

from the ground.

The machine should be installed in a well ventilated location. It can be

located close to walls if they have a good resistance to heat. If not, leave a

space of at least 5 cm between the machine and any walls, to prevent fire

hazards.

The machine is equipped with a power cable with a section of 3x1.5 mm²,

a length of 1.5 mt and a SHUKO plug.

Connect the machine to a 230 Volt 50 Hz power supply installing a

differential - overheat cutoff circuit breaker calibrated at 15A, I = 0.03A.

Ascertain that the grounding system is in perfect working order.

Check also that the data on the rating - serial number plate (see Fig. 4)

corresponds with the data on the delivery bill and that the switch and

socket are readily accessible when the machine is in use.

Fig.n°4 - Technical rating plate with serial number