Burlington RIV2 GOLD Installatie-instructies - Pagina 3

Blader online of download pdf Installatie-instructies voor {categorie_naam} Burlington RIV2 GOLD. Burlington RIV2 GOLD 4 pagina's.

Pagina afdrukken
IMPORTANT:
For valve body installation,please refer to instructions included with HOX.005V.
For RIV3 trim sets, please follow below steps to install:
1. Remove part A and part B from the valve. Part A & B, with the two plastic rings included
in the valves are NOT need for this installation.
Attention: Please do NOT rotate the cartridge when removing part A.
2. Parts should be assembled in sequence illustrated by Figure 1.
1) Screw the retaining sleeve onto the valve body.
2) Slide the back plate onto the retaining sleeve, slightly press the back plate evenly so
that the double-sided tape on the back attach to the wall.
3) Install the handle fixing and temperature handle fixing. For the TEMPERATURE
HANDLE FIXING, ensure the position D is aligned with position C as indicated in the
diagram.Then fix the 2 handle fixings by the screws supplied.
3. Assemble the 2 handles (lever handle on the top and cross handle on the bottom).
Riviera 1000 shower plate and handles Chrome
Riviera 1000 shower plate and handles Gold
Riviera 1500 shower plate and handles Chrome
Riviera 1500 shower plate and handles Gold
Installation of RIV2 CHR/GOLD trim sets (needs to be used with HOX.006V)
HOX.006V parts included
B
RETAINING
SLEEVE
A
TEMPERATURE
SCREW
HANDLE FIXING
in the box)
HANDLE
BASE
D
Figure 2
RIV2 CHR
RIV2 GOLD
RIV3 CHR
RIV3 GOLD
RIV2 CHR/GOLD parts included
RETAINING
BACK PLATE
SLEEVE
HANDLE
FIXING
SCREW
HANDLE
HANDLE
BASE
BACK PLATE
HANDLE
FIXING
HANDLE
SCREW
(supplied
HANDLE
HOT
C
HANDLE
SCREW
COLD