Burmester 035 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Burmester 035. Burmester 035 16 pagina's.

The tone controls allow increasing or decreasing bass output in 2dB steps from plus to minus 10dB and treble output

from plus to minus 14dB. A setting of 0 (0dB) corresponds to neutral setting.

If you don't wish tone controls, please deactivate it (see below).

Adjusting the

Pressing and holding the key labeled TONE (2) switches into the tone control menu.

tone controls

The menu items bass and treble can be called up sequentially by briefly pressing the TONE

key.

BASS ADJUSTMENT:

TREBLE ADJUSTMENT:

The tone control mode is automatically terminated after a few seconds without any

adjustment. The selected settings are retained when leaving the tone control menu.

The tone control will be switched into the signal path after terminating the menu and the

TONE LED (3) lights up.

Activating/Deactivating In normal operation the signal path by-passes the tone control completely.

the tone controls

To switch the tone controls into the signal path press the key labeled TONE (2) briefly. The

TONE LED (3) illuminates when the tone controls are activated.

To switch the tone controls off press the key labeled TONE (2) briefly again and the TONE

LED (3) will go out.

The 067 remote control is delivered with the 035. By definition the keys on the remote control labeled POWER,

TUNER, PHONO, TAPE, AUX, SURR have the same functions as the corresponding control buttons on the front

panel of the pre amplifier 035.

The DISC key has the same function as the CD button on the front panel of the 035.

The DIM key has the same function as the DISPLAY button on the front panel of the 035.

The keys VOLUME + and VOLUME – control the volume level of the output.

All other keys on the remote control have no functions with respect to the 035.

TONE CONTROLS

The display shows BASS ....

Use the VOLUME knob (6) to adjust the bass between –10dB

and +10dB.

The display shows TREB ....

Use the VOLUME knob (6) to adjust the treble between –14dB

and +14dB.