Diamond CGE11 N 230/1 Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} Diamond CGE11 N 230/1. Diamond CGE11 N 230/1 12 pagina's. Electric fan ovens
Ook voor Diamond CGE11 N 230/1: Installatie - Gebruik - Onderhoud (11 pagina's), Installatie - Gebruik - Onderhoud (12 pagina's), Installatie - Gebruik - Onderhoud (12 pagina's), Installatie - Gebruik - Onderhoud (12 pagina's), Installatie - Gebruik - Onderhoud (12 pagina's)
Pagina afdrukken
In the case of delivery by our opinion the
equipment can also be devoid of packaging, other
types of packaging can be provided according to the
destination and / or customer requirements.
MEANS NECESSARY FOR HANDLING
The equipment can be lifted and moved with a
forklift, crane, cranes or other appropriate means
having an adequate capacity.
Check the alignment of the forks and the stability of
the load before moving the equipment.
For handling Always follow the following rules:
- Slowly moved the equipment.
- Do not tilt the device but always keep it upright.
- Be sure to always check the equipment during
handling.
WARNING!
Do not spill the equipment.
Not carry the equipment.
Not cause jolts equipment.
STORAGE EQUIPMENT
And 'advisable for the storage environment is dry
with temperatures ranging from 0 ° C to 40 ° C.
Do not stack more than the equipment packed
indication on the packaging and keep the vertical
position indicated by the arrows marked on the
packaging itself.
Make sure that the forks do not hit the frame of the
equipment. In the event of accidental damage
immediately controlled, if necessary contact the
manufacturer.
1. DISPOSAL OF PACKING AND OF THE
APPLIANCE
PACKING
The packing is made using environmentally friendly
materials. The plastic recyclable components are:
- the transparent cover, the bags containing the
instructions
manual
Polyethylene - PE).
and
nozzles
(made
- the straps (in Polypropylene - PP).
APPLIANCE
The appliance is manufactured 90% from recyclable
metals (stainless steel, aluminium sheet, copper.. ..
).
The appliance must be scrapped in compliance with
current regulations governing such disposal.
Make the appliance unusable before scrapping.
It must be disposed of properly.
2. SAFETY AND CONTROL DEVICES
SAFETY THERMOSTAT
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING FROM FAILURE TO
OBSERVING THE FOLLOWING RULES.
The appliance is equipped with a manual reset
safety thermostat that interrupts heating when the
operating temperature exceeds the maximum
permitted value.
To
restore
thermostat reset button. This procedure must only
be carried out by a qualified, authorized technician.
INSTRUCTIONS FOR
II.
INSTALLATION
3. REMINDERS FOR THE INSTALLER
READ THIS MANUAL CAREFULLY. IT
PROVIDES IMPORTANT INFORMATION
FOR SAFE INSTALLATION, USE AND
MAINTENANCE OF THE APPLIANCE.
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING FROM FAILURE TO
OBSERVING THE FOLLOWING RULES.
Identify the specific appliance model. The model
number is detailed on the packing and on the
appliance dataplate.
of
The appliance must be installed in a well-ventilated
room.
12
appliance
operation
press
the