Aquasana AQ-4055 Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Aquasana AQ-4055. Aquasana AQ-4055 2 pagina's. Under-sink adapter kits for use with the aquasana aq-4000

Pagina afdrukken

PRECAUTIONS:

• Read all instructions carefully

• No constant hydrostatic

pressure line to filter allowed.

• Use teflon tape only. Do not

use plumber's putty.

• For technical support call:

866-2DRINK8

UNPACK THE CONTENTS of the

Under-sink adapter kit and

determine the appropriate location

for the faucet to be mounted. The

faucet may be mounted using an

existing hole for a sprayer nozzle or

other accessory, or by drilling a 7/8˝

hole in the sink or counter-top. We

do not recommend drilling granite

or porcelain sinks unless done by a

professional. Be sure the location of

the faucet allows the outlet spout

to extend slightly past the edge of

the sink.*

*All of our faucets have a 4˝ overhang

CONTENTS LIST

Open Relief faucet

Mounting Bracket

Screws and Anchors

1/2˝ Plumbing Tee

3/8˝ Plumbing Tee

MOUNT THE FAUCET AS

SHOWN in diagrams A & B.

Mount the filter unit using

the white steel mounting

bracket and screws in figure below.

Make sure that the location of the

filter unit allows the tubing from

the faucet to connect to the base

of the filter without kinking or side

pressure; if the hose is not able to

plug straight into the inlet without

side pressure, it may drip.

TURN OFF YOUR COLD WATER

SUPPLY VALVE and attach

the "T" valve fitting to the cold

water supply line as shown in

figure A or B.

If your cold water supply line is not

a standard line, and does not allow

use of the supplied "T" fittings ,

you will need to purchase a "T'

adapter or saddle valve from your

local hardware or plumbing supply

store. It will need to have a 1/4˝

compression outlet from the "T".

FIGURE A

Brass "T" fitting

FIGURE B

PVC "T" fitting