Aquasana OptimH2O AQ-RO3-R Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aquasana OptimH2O AQ-RO3-R. Aquasana OptimH2O AQ-RO3-R 4 pagina's. Reverse osmosis under sink water filter

Pagina afdrukken
3
3
3
3
3
2
2
2
2
1
1
1
2
1
3
3
1
1
2
2
1
2
Once both filter housings
7
slowly turn water valve on. Turn off faucet and allow the water tank
to completely fill.
NOTE: This may take about 2 hours.
Once the tank has completely
8
flush system until there is no longer any water pressure coming
out of the faucet.
NOTE: Do not drink flushed water.
9
Turn off the faucet
back up in the system. After pressure has built back up, your
system is ready to use.
Press new replacement filter
5
the filter housing using the appropriate color
coded filters. Then, reconnect the bottom
3
3
3
3
3
3
of the filter housing to the top half. Ensure
2
connection points are correctly aligned, then
turn clockwise to tighten. Continue this step
for the second filter housing.
1
1
2
2
2
1
2
Reattach filter housing
6
bottom of the system manifold.
Ensure connection points are
correctly aligned, then push the filter
housing up while turning clockwise.
Continue this step for the second
and third filter housing. Ensure all
filter housings are locked in place, are not on an angle,
and are aligned as pictured. Improper placement may
result in damage to the o-ring or leakage.
and allow 2 hours for the pressure to build
1
NOTE: Do not use tools to
tighten. Hand tighten only.
have been replaced and reattached,
filled, inspect for leaks. Then,
to the top of
to the