Burnerphone MIAMI BURNER Snelstarthandleiding - Pagina 11

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Burnerphone MIAMI BURNER. Burnerphone MIAMI BURNER 18 pagina's.

To Change the Time and Date: From your home screen, select the Application

drawer icon (four squares). Swipe from right to left and scroll to the Settings icon and

select it. Scroll to the bottom of the list and select Date & Time. From inside this menu

you can change the date and time along with display formats. It is recommended to use

Automatic Date and Time and Automatic Time Zone which uses information provided by

your Wireless Carrier. Note: Some wireless providers may not send this information over

the wireless network requiring manual date and time settings.

Change your Display Settings: From your home screen, select the Application drawer

icon (four squares). Swipe from right to left and scroll to the Settings icon and select it.

From your settings menu, scroll to the Display icon and select it. From this menu, you can

modify Lock Screen Notifications, Themes, Wallpaper, Brightness, Screen Sleep (timeout),

and Font Sizes.

Other Settings: There are many other settings that can be found in the Settings of your

device. You can enable device security and lock from here, or change the power settings. It

is highly recommended that you familiarize yourself with this area of your device.

Adding a Bluetooth Device

Your Burnerphone is equipped with Bluetooth for connectivity to different Bluetooth

devices such as Headsets, Speakers, Vehicles, etc.

To Add a Bluetooth Device: From your home screen, select the Application drawer

icon (four squares). Swipe from right to left and scroll to the Settings icon and select it.

Select the Bluetooth Icon. Enable Bluetooth by swiping the toggle switch to the ON

position. Enable pairing mode on the device which you wish to pair with your

Burnerphone. Once enabled, the device should be listed in the Available Devices

dropdown. Click on the device you wish to pair with and enter the Bluetooth PIN for the

device being connected. Please consult your Bluetooth device instruction manual for

Bluetooth PIN information. Most device manufactures set default PIN's to "0000".

To Remove a Bluetooth Device: From your home screen, select the Application

drawer icon (four squares). Swipe from right to left and scroll to the Settings icon and

select it. Select Bluetooth. Select the slider next to the device which you wish to Unpair,

and select Unpair.

To reset your Burnerphone to a factory state from your home screen, select the

Application drawer icon (four squares). Swipe from right to left and scroll to the Settings

icon and select it. Scroll down to Backup & Reset and select it. Scroll to the very bottom

- 11 -