Aquascale BABY BATH STAND Instructies voor montage en gebruik - Pagina 3
Blader online of download pdf Instructies voor montage en gebruik voor {categorie_naam} Aquascale BABY BATH STAND. Aquascale BABY BATH STAND 8 pagina's.
Pagina afdrukken
Welcome
Thank you for purchasing this aqua scale baby bath stand.
Please read the instructions and safety advice carefully before use, to ensure safe and
satisfactory operation of this product. Your child's safety is your responsibility.
If you have a query with this product or require replacement parts, please contact the
Helpline on 0161 335 2508.
Lay out the parts on a soft level surface and compare them to the parts list below. Do
not discard any packaging until you are sure that you have all the parts.
Keep children clear during assembly as the pack may contain small parts which could
present a choking hazard. Once you have identified the parts all plastic covers should
be removed, destroyed or kept away from children.
Safety instructions
The aqua scale stand is designed specifically for use with the aqua scale 3-in1 baby
bath. WARNING: Use only on firm ground which is horizontal, level and dry.
Ensure there is enough space around the bath to safely handle the child in and out of
the bath.
WARNING: Do not let other children play unattended near the aqua scale stand.
Ensure bath stand is fully open and that the two leg braces are locked into position.
Regularly check that all nuts, bolts and assembly fittings are tight and secure before
use.
WARNING: Do not use the bath stand if any parts are damaged, missing or loose.
Do not move the bath stand whilst bathing baby, or when there is water in the bath.
Only use spares approved by the manufacturer.
Do not use the bath stand for purposes other than what it was designed for.
When the aqua scale stand is not in use it must be folded away.
Care and maintenance
Wipe clean using a mild soap and warm water. Dry thoroughly.
Never use ammonia based, bleach or spirit cleaners.
Do not use abrasive cleaners or abrasive pads.
Ensure product is dry before storing.
Always check parts regularly for tightness of nuts bolts and assembly fittings - tighten if
required. To maintain the safety of your nursery product, seek prompt repairs for bent,
worn or broken parts.
1